How to Read a Metal Detector: A Beginner’s Guide

Below is the guideline on how beginners can read metal detectors, a metal detector is used to collect lost precious metals by forming a powerful magnetic field around that is in a position to magnetize and locate lost metals. A metal detector is made up of several wires that are sensitive that form a magnetic field that produces sound when in contact with the metal. How to read a metal detector? A beginner’s guide

  1. First, you have to do is to turn on the metal detector. This is the first step that will set you going.
  2. The second thing is to select the setting for your metal detector. To effectively do this, you have to read the manual of your specific metal detector thoroughly to find out what chances are available for your device. Some metal detectors allow users to select the type of metal they want to search. It is always recommended that you enable your metal detector to be in search mode all.
  3. Begin your search. This step seems t be the obvious one; you can’t just move and wave around your metal detector and expect the best results. You have to be slow and low enough to keep your detector coil low enough to the ground. Next thing you have to do is to swing the detector very slowly without touching it to allow it detects any precious metal on the ground.
  4. Digging. After discovering the position of your search metal, dig around the area. You need to have specialized tools for digging for plugging. If the place has a lot of grasses, try your level best not to disturb the grassroots as much as possible.

You should also keep in mind the ethics of metal detecting, always get the required legal permission to dig and leave the area in good condition they way you found it.